Smart Home Security Products

GoControl Brand

 

WD1000Z-1: Z-Wave Wall Dimmer Switch


The Wireless Z-Wave wall mount dimmer allows remote ON/OFF control and dimming of connected lights. The smart dimmer switch is easily wired in place of a standard wall dimmer, and requires a Neutral connection. The WD1000Z-1 dimmer has a field replaceable trim ring - the color of the device can be altered with the Trim ring kit model in black, brown, and almond.

Specifications

  • • Maximum Load: 1000 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)
  • • Signal (Frequency): 908.42 MHz
  • • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • • Input: 120v 15A 60Hz
  • • Network wide inclusion
  • • Scene: Command Class
  • • Security beaming
  • • Requires a Neutral connection
  • • Auto Sense allows for local lamp activation independent of the Z-Wave controller status
  • • Fits in standard J-box
  • • Decorator wall plate included
  • • Replaceable trim ring design
  • • Also available in 500W (Part #WD500Z-1)

Technical Bulletin: Z-Wave 3-Way Light Switch Setup (.pdf)

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.

Order number: WD1000Z-1



WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov