Smart Home Security Products
FS20Z-1: Z-Wave Isolated Contact Fixture Module
The FS20Z-1 Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical box to operate loads or control relay-based devices. The relay can be isolated for dry contact applications or powered to switch live loads. This device can operate loads of up to 277v.
Possible Applications : Commercial Lighting, In-Ceiling Lighting/fans, Dry-Contact Relays, Pool Pumps, Water Heaters.
The Contact Fixture integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Specifications
- • Maximum Load:
Isolated Contacts: 20 amps G.P. maximum, 277 VAC, 10FLA, 60LRA, 250VAC
Motor: 1 H.P. maximum, 120/240 VAC
Incandescent: TV8 (Tungsten), 120 VAC, 960W maximum - • Signal (Frequency): 908.42 MHz
- • J-Box mounted
- • Dry or wet contact applications
- • Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device
- • Input: 120 VAC, 50/60 Hz
- • Z-Wave Version 4.55
- • Network wide inclusion
- • Scene: Command Class
- • Security beaming
- • Isolated Relay Output up to 277v
Order number: FS20Z-1
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov